Search Results

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.

The results are given of laboratory investigations made of a number of different types of carbureters, showing the relation between their gasoline and air consumptions over a wide range. This relation is plotted on so-called quality diagrams, on which is indicated the range between which high power and high efficiency can be expected. A description is given of a carbureter arranged in two stages, the first being used at light load and the second coming into action when the throttle is nearly open, thereby more than doubling the carbureter capacity. Engine performance curves are presented showing the result when only one or both stages of this carbureter are used.

The question as to whether a part should be made or bought is one that must be settled by the individual maker according to the value of his product, the nature of the part, his capital available for manufacturing purposes and the price at which his product is sold. The author describes the practice followed by some of the large companies, showing that in spite of their being quantity producers, they have found it desirable to buy a number of important parts. Certain parts are rarely made by automobile manufacturers, either because they can be bought more cheaply or because the machinery to produce them is intricate. The author sums up the problem by stating that a manufacturer makes the unit on account of not getting deliveries or because he does not get a fair price from the parts maker or an article good enough to satisfy his conditions. In order to give individuality to the product, the car maker often produces certain parts, such as the engine, himself.

The author limits his consideration of rear axles to that of the bevel-gear type and takes up the subject under the heads of load-carrying member, gearing, driving-shaft, brakes and materials. Several different forms of cast and pressed axle housings are briefly described. Mention is then made of the axle gearing and data given showing the end thrust for straight-tooth bevel pinions. The methods of supporting pinions and of attaching bevel gears to the differential are discussed. Forms of differentials are considered, several different conventional types being illustrated. The subject of driving shafts is briefly reviewed, as is also that of brakes and brake materials. The author concludes his paper by figures showing the tensile strength, elastic limit and elongation of the metals used in the various parts of the rear axle and also explains some oil-retaining and dust-protecting features of design.

The author considers the effects of velocity variation on the operation of a car and states that this variation is absorbed mainly by the flywheel. A formula is given for calculating the pressure on universal bearings. Various methods of protecting and lubricating joints are described. A number of European types of joints are illustrated. A much larger number of types of joints are used abroad in-asmuch as each maker usually makes his own design instead of purchasing it from a specialist as is the usual practice in this country. In conclusion the paper describes types of joints using flexible material, such as leather or spring steel.

The author outlines in a general way the relation of car performance to modern engine development. He considers particularly weight reduction and torque performance of high-speed engines, giving the undesirable characteristics attending the increased torque range gained by higher speed. He next discusses the relation of torque to total car weight, to acceleration and to hill-climbing ability and suggests a method of determining the value of a car in terms of its performance ability. The author holds incorrect those systems in which the amount of lubrication is in proportion to speed only; and in which oil for crankshaft and crankpin bearings must cool as well as lubricate them. He shows a system designed to solve these oiling problems. Static, running and distortion balance of a rotating mass are defined by the author, who shows how they apply to a large number of types of crankshafts.

The author gives a brief review of developments during the past year in the construction of aeroplanes, particularly as affected by the European War. He takes as an example the Renault twelve-cylinder engine, citing the respects in which the present differs from previous models. Such factors as the changes in cooling systems, method of drive, valve construction and starting devices are considered. The requirements of aeroplane engines, such as constant service, high speeds (of aeroplanes) and stream-line form of engines and radiators, are outlined. Propeller requirements are dealt with at length, curves being given by which the efficiency and diameter of the propeller can be obtained. In conclusion a number of different engine installations are illustrated and compared.

This paper is mainly an argument in favor of the use of large, single rear wheel truck tires instead of smaller dual tires. Although the practice of using large singles is comparatively new, the author gives the results of experience and research to show the advantages of the newer method of rear tire equipment. In developing his arguments in favor of single tires, the author goes into the history of dual tire application to show why it was necessary to use two tires in the earlier days of truck operation. As the necessity for increased carrying-capacity grew, tire manufacturers found the then existing single tire equipment inadequate, and they set about to develop suitable equipment to meet the new condition, the result being dual practice. The method of attaching the earlier dual tires is shown to have been poor, resulting in circumferential creeping of the whole tire to a much greater extent as the width of the dual equipment increased.

The authors first define the elementary conditions governing combustion efficiency, dividing these conditions into three main classes. They next compare engines operating on constant volume, constant temperature and constant pressure cycles, dealing specifically with the Otto, Diesel and semi-Diesel types. The main part of the paper is devoted to an outline of the constant pressure cycle, analyzing its advantages as compared with the merits of the constant volume cycle now used in internal-combustion engines. The paper is concluded with a detail description of a proposed constant pressure engine.

The author has selected fourteen automobiles on which to make a study of the factors of safety used in their design. He considers specifically the front axles, front-wheel spindles, propeller-shafts, clutch-shafts, transmission drive-shafts and rear-axle drive-shafts. The method of calculating the stresses is outlined; compositions of the steels used are given; and complete data are presented showing the factors of safety of the various parts, together with the intermediate figures used in obtaining the factors.